Recombination of neutral oxygen atoms on stainless steel surfaceMOZETIC, M; ZALAR, A.Applied surface science. 2000, Vol 158, Num 3-4, pp 263-267, issn 0169-4332Article

Mechanical properties of 304L stainless steel SMAW joints under dynamic impact loadingLEE, Woei-Shyan; TZENG, Fan-Tzung; LIN, Chi-Feng et al.Journal of materials science. 2005, Vol 40, Num 18, pp 4839-4847, issn 0022-2461, 9 p.Article

Morphological and microstructural aspects of metal dusting on 304L stainless steel with different surface treatmentsLIN, Chao-Yi; CHANG, Chia-Hao; TSAI, Wen-Ta et al.Oxidation of metals. 2004, Vol 62, Num 3-4, pp 153-174, issn 0030-770X, 22 p.Article

Friction Welding of Titanium to 304L Stainless Steel Using Interlayers = Reibschweissen von Titan an nichtrostendem Stahl 304L unter Anwendung von ZwischenschichtenASHFAQ, M; PRASAD RAO, K; KHALID RAFI, H et al.Praktische Metallographie. 2011, Vol 48, Num 4, pp 188-207, issn 0032-678X, 20 p.Article

Abnormal grain growth in AISI 304L stainless steelSHIRDEL, M; MIRZADEH, H; PARSA, M. H et al.Materials characterization. 2014, Vol 97, pp 11-17, issn 1044-5803, 7 p.Article

Microstructure and characterization of phases in TIG welded joints of Zircaloy-4 and stainless steel 304LAHMAD, M; AKHTER, J. I; AKHTAR, M et al.Journal of materials science. 2007, Vol 42, Num 1, pp 328-331, issn 0022-2461, 4 p.Article

Worm-like delamination patterns of thin stainless steel films on polycarbonate substratesCOLIN, J; CLEYMAND, F; COUPEAU, C et al.Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties. 2000, Vol 80, Num 11, pp 2559-2565, issn 1364-2804Article

Influence of oxidation time on semiconductive behaviour of thermally grown oxide films on AISI 304LHAMADOU, L; KADRI, A; BOUGHRARA, D et al.Applied surface science. 2006, Vol 252, Num 12, pp 4209-4217, issn 0169-4332, 9 p.Article

Effect of texture on corrosion behavior of AISI 304L stainless steelRAVI KUMAR, B; SINGH, Raghuvir; MAHATO, Bhupeshwar et al.Materials characterization. 2005, Vol 54, Num 2, pp 141-147, issn 1044-5803, 7 p.Article

Atomic force microscopy observations of debonding in 304 L stainless steel thin filmsTALEA, M; BOUBEKER, B; CLEYMAND, F et al.Materials letters (General ed.). 1999, Vol 41, Num 4, pp 181-185, issn 0167-577XArticle

Performance of Cr oxide coatings on 304 steel against metal dustingMELO-MAXIMO, L; SALAS, O; MELO-MAXIMO, D et al.Surface & coatings technology. 2013, Vol 237, pp 39-50, issn 0257-8972, 12 p.Conference Paper

Modelling of keyhole dynamics and porosity formation considering the adaptive keyhole shape and three-phase coupling during deep-penetration laser weldingHAIYAN ZHAO; WENCHONG NIU; BIN ZHANG et al.Journal of physics. D, Applied physics (Print). 2011, Vol 44, Num 48, issn 0022-3727, 485302.1-485302.13Article

Corrosion performance of TiO₂ coated type 304L stainless steel in nitric acid mediumPADHY, N; KAMAL, Subhash; CHANDRA, Ramesh et al.Surface & coatings technology. 2010, Vol 204, Num 16-17, pp 2782-2788, issn 0257-8972, 7 p.Article

Creep constitutive equations for cold-drawn 304L stainless steelFARID VAKILI TAHAMI; AMIR HOSSEIN DAEI-SORKHABI; FARID REZA BIGLARI et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2010, Vol 527, Num 18-19, pp 4993-4999, issn 0921-5093, 7 p.Article

Critical time for non-equilibrium grain boundary segregation of phosphorus in 304L stainless steelKAI WANG; MINQING WANG; HONG SI et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2008, Vol 485, Num 1-2, pp 347-351, issn 0921-5093, 5 p.Article

In situ AFM detection of pit onset location on a 304L stainless steelMARTIN, F. A; BATAILLON, C; COUSTY, J et al.Corrosion science. 2008, Vol 50, Num 1, pp 84-92, issn 0010-938X, 9 p.Article

Electrophoretic deposition of TiO₂ and TiO₂+CeO₂ coatings on type 304L stainless steelKAMACHI MUDALI, U; SRIDHAR, T. M; RAJENDRAN, N et al.Surface engineering. 2007, Vol 23, Num 4, pp 267-272, issn 0267-0844, 6 p.Article

Effect of strain rate on stress-strain behavior of alloy 309 and 304L austenitic stainless steelLICHTENFELD, Joshua A; MATAYA, Martin C; VAN TYNE, Chester J et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2006, Vol 37, Num 1, pp 147-161, issn 1073-5623, 15 p.Article

Hydrogen effect on nitriding process of 304L austenitic stainless steelGARAMOON, A; RASHED, U. M; ABOUELELA, A et al.IEEE transactions on plasma science. 2006, Vol 34, Num 4, pp 1066-1073, issn 0093-3813, 8 p., 1Article

Brazing of hot isostatically Pressed-Al₂O₃ to stainless steel (AISI 304L) by Mo-Mn route using 72Ag-28Cu brazeMISHRA, P; SENGUPTA, P; ATHAVALE, S. N et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2005, Vol 36, Num 6, pp 1487-1494, issn 1073-5623, 8 p.Article

Strategy for the design of thermomechanical processes for AISI type 304L stainless steel using dynamic materials model (DMM) stability criteria and model for the evolution of microstructureVENUGOPAL, S; MANNAN, S. L; RODRIGUEZ, P et al.Journal of materials science. 2004, Vol 39, Num 16-17, pp 5557-5560, issn 0022-2461, 4 p.Article

Microstructural evolution in adiabatic shear localization in stainless steelMEYERS, M. A; XU, Y. B; XUE, Q et al.Acta materialia. 2003, Vol 51, Num 5, pp 1307-1325, issn 1359-6454, 19 p.Article

Comparative study of the impact response and microstructure of 304L stainless steel with and without prestrainLEE, Woei-Shyan; LIN, Chi-Feng.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2002, Vol 33, Num 9, pp 2801-2810, issn 1073-5623Article

Comparison of residual microstructures associated with impact craters in fcc stainless steel and bcc iron targets: the microtwin versus microband issueMURR, L. E; TRILLO, E. A; BUJANDA, A. A et al.Acta materialia. 2002, Vol 50, Num 1, pp 121-131, issn 1359-6454Article

Effect of biomineralized manganese on pitting corrosion of type 304L stainless steelOLESEN, B. H; YURT, N; LEWANDOWSKI, Z et al.Materials and corrosion (1995). 2001, Vol 52, Num 11, pp 827-832, issn 0947-5117Article